Wet N Gone Tacky Pressure Sensitive Water Soluble Stabilizer by Floriani (FWGT)



Floriani Wet N Gone Tacky
Pressure Sensitive  Water Soluble Stabilizer

This fibrous water-soluble stabilizer features a pressure sensitive coating for holding hard to hoop items in place while you stitch or embroider. The water soluble base does a beautiful job of supporting dense embroidery designs on most fabric styles where complete stabilizer removal is desired. Use for holding down corners of napkins and handkerchiefs, collars and cuffs as well as the edges of hand towels, ribbons and more! Use the new tape size rolls for turning up hems for flawless stitching, securing decorative trims and edging or use as an ideal foundation for built in decorative stitches. The new printable sheets provide a perfect template for thread painting, red-work, cross-stitch, bead work and more!

To use Wet N Gone Tacky®:

1. Place one layer of the product in your embroidery hoop, paper side up.
2. Score the release paper with a pin or needle and peel back. 
3. Stick the garment or item to be embroidered in place and smooth out any wrinkles.
    *Tip - It is necessary to use "soft" water to get optimal rinse results with this product.
4. Repeat steps 2 - 4 from above.

To use Wet N Gone Fusible®:
1. Fuse one layer of the stabilizer on to the back of the fabric. Be sure to use a piece
    at least one inch larger than the outer parameter of the hoop to insure proper
    stabilization. *Important - Use a low temp (260°, silk) setting on your iron. Do not
    touch the surface of your iron to the Wet N Gone Fusible®, use a press cloth
    (muslin or cotton). Press quickly! It is not necessary to hold the iron to the fabric
    for more than three seconds.
2. Repeat steps 2-4 from above.

To use regular Wet N Gone® for free standing lace and/or embroideries:
1. Hoop one layer of the stabilizer within the embroider frame. Try to achieve "tight
    as a drum" tension without stretching or distorting the stabilizer. 
2. Embroider the design.
3. Remove the product from the hoop and trim away as much of the stabilizer as
    possible.
4. Rinse away the Wet N Gone® using luke warm water. *Tip - If your desire is to
    have the lace stiff, simply get the embroidery wet. Don't rinse! Once it is wet, the
    stabilizer will be absorbed into the stitching and will dry stiff. 

Floriani's Wet N Gone Tacky Product Identity
 FWGT910           9" X 10 yds
 FWGT1210        12" X 10 yds
 FWGT2010        20" X 10 yds
 FWGTS             (20) Printable Sheets -- 8.5" x 11"
 FWGT-1X10      1" x 10 yds (Tape)
 FWGT-1/2X10   1/2" x 10 yds (Tape)

 

 

 

 

 

 

Download the Floriani Stabilizer Brochure HERE (Right-Click "Save Target/File/Link As")
Download the Floriani Stabilizer Workbook HERE (Right-Click "Save Target/File/Link As")
Return to our top level Floriani stabilizer section HERE.
Review our exceptional quality Floriani threads HERE.
Browse all of our brands of stabilizer HERE.


Wet N Gone Tacky Pressure Sensitive Water Soluble Stabilizer by Floriani (FWGT)
FWGT

"Select-Size": 
www.SewingSupplyWarehouse.com has been serving your embroidery, sewing, and quilting
needs since 2000. We are an authorized dealer for Brother, Simplicity, and Handi-Quilter.
We offer replacement parts, accessories, and notions for most brands of household machines.
We combine the service of a small company with the robust security backing of the Yahoo! Stores.
ecommerce provided by Yahoo! Small Business